SystemAir Sense SNX, Installation,Operation And Maintenance Instruction, Page: 15 / 28

15
6.3 To do before maintenance
6.4 To open the product
Warning
Turn the unit off with a main switch
and wait for minimum of five minutes
before starting to working on the unit.
Indication that the unit is not working, can be seen on the
HMI when the icon on it shows:
To open left and right door
Only one servise technician is needed for opening door.
1. Remove all 3 screws on each door. Use M6 imbus tool.
2. On the back side near wall see the blocking element.
Warning
Hold the door at all times before you
open it to negate the door falling
down.
Warning
Two service technicians are needed
for removing the middle panel.
To open the control cabinet
1. Remove all 4 screws on the panel. Use M6 imbus tool.
One person needs to always hold the panel.
3. Pull the element towards you to unblock the door.
4. Open the door.