WARNING!
Fatal hazard due to improper transport!
If sections are moved and transported without
using the devices provided and sections are lifted,
or fall or topple during transport, then danger to life
and substantial material damage could occur.
–
Ensure that doors, dampers and panels are
fixed and secured.
–
Make sure that the control cabinet mounted
on the device is sufficiently secure and cannot
swing out.
–
Vehicles must be designed for the weight of
the transport sections and approved for trans-
porting.
–
Do not knot ropes, belts or chains or lay them
on sharp edges.
–
Make sure that the ropes cannot twist.
–
Secure the means of transport only to the
marked fastening points.
–
The forks of the fork-lift truck must be longer
than the depth of the transport section.
–
Lift transport sections without marked lifting
points or transport sections within the base-
frame exclusively underneath the transport
section.
–
Ropes, belts or chains may not touch the
device during transport. Use suitable rope
spreaders or upper lifting beams.
–
Do not place any pressure on handles, fluid
connections and protruding parts either directly
or indirectly.
–
Do not use the transport itself as a means for
permanent device suspension.
–
Make sure that there are no objects, people or
obstacles in the pivoting range of the transport
section while it is being moved.
–
In addition, follow the instructions on transport:
Chapter 2 ‘Transport and storage’
Improper transport
Safety during the dismantling and disposal
25.08.2022
Device type: Menerga TX - ThermoCond
47
