1
14:33
22
0
°C
.
11 0°C.
!
CO 2
OK
OK
SYNCHRONIZATION
FIRST START
CHANGE OF MODBUS ADDRESS
SYSTEM ALARMS
Switch off power supply
by switching main swith
on the SENSE unit.
System synchronization.
Wait few seconds...
When synchronization is finished,
HMI is ready to use.
Switch on power supply
on the SENSE unit.
Enter menu for change of modbuss address
On first start, when HMI is
connected with controller,
display for changeing
Modbus ad
d
ress of the HMI is
displayed.
With keys and select Modbus a
d
dress of HMI. With key
acknowledge selection.
8
sek
In menu for changing of Modbuss address is possible to enter in first
minute while HMI is powered. By simunltaneously pressing two keys
and for 8 second,
y
ou will enter menu.
S01
– Error in data connection between controller and HMI. Check if the data cable is correctly
connected to the connector on SENSE unit and HMI. When the cause of the error is removed,
the error is automatically acknowledged.
S02
– Touch screen error. In the
case
of this error, HMI or controller must be serviced.
Only trained perso
n
nel is authorized to
operate
with main switch.
Factory set is 2.
LCD display for SENSE
First start
1
14:33
22
0
°C
.
11
0
°C
.
!
CO 2
OK
OK
OK
SETTING OF MODBUS ADDRESS
!
!
S01