SystemAir K 100 EC, Installation,Operation And Maintenance Instruction

Page: 7 / 36

4 Installation
4.1 To do before the installation
of the product
• Make sure that you have the necessary installation
accessories:
– Refer to 13 Accessory overview page 30 for an over-
view of the accessories.
– If you install the product outdoors, it is necessary to in-
stall a weather protection roof.
– To decrease vibrations transmitted from the product to
the duct system, Systemair recommends to install vi-
bration dampers, fast clamps or flexible connections.
– If you install the product with free suction or free dis-
charge, it is necessary to install a protection grille.
Make sure that the safety distance agrees with the
standard DIN EN ISO 13857 and the standard DIN
24167–1.
• Use installation material with fire resistance rating for the
installation location.
• Examine the packaging for transportation damage and re-
move the packaging from the product carefully.
• Examine the product and all components for damage.
• Make sure that the motor effect and the fan performance
agrees with the expectations at the installation location.
• Make sure that the information on the name plate and the
motor name plate agrees with the operation conditions.
• Install the product in a location where there is space for
commissioning, troubleshooting and maintenance.
• Make sure that the installation location is clean and dry,
for full safety during electrical work.
• Make sure that the installation surface has sufficient ca-
pacity to hold the weight of the product.
• Refer to the airflow direction arrows on the name plate or
on the product to install the product in the correct position.
• Make sure that all cable glands are tight against the ca-
bles to prevent leaks.
4.2 To install the K fans
The product can be installed in any position, on wall or ceiling
using the mounting bracket which is included at delivery. Re-
fer to
4.2.1 To install the mounting bracket for K fans page 5
for K fans. The product can also be installed in the ceiling us-
ing pendulum bars or wires. Pendulum bars, wires and nuts
are not supplied by Systemair.
1 Install the mounting bracket or the pendulum bars to the
product casing. Refer to
4.2.1 To install the mounting
bracket for K fans page 5 .
2 Attach the product to the wall or the ceiling with the 2
supplied screws.
4.2.1 To install the mounting bracket for K fans
1
2
3
3
2
1
Y
X
5