SystemAir FGT010, Instructions Manual

Page: 109 / 143

7
On the top left of the screen you should have ''DI1'' selected:
Press DOWN key button (4x) for ''DI5''.
Press OK button and then press DOWN key (19x) for ''Change-over''.
Press OK (2x) to confirm.
Press DOWN key button (2x) for ''DI7'':
Press OK button and press UP key button (15x) for ''Ext-alarm1'' NOT ''Ext-alarm10''!
Press OK button and with UP key change from NO to NC contact:
Press OK.
With this setting, we will be notified if there is an error with the DX unit. If we have the contact on
NC position, it will be able to detect lost connection or a broken cable, between the DX unit and the
controller.