17
SHR 8005R, SHR 14105R Models
Without External Control
1. Fan speed selector switch
• Set fan Speed selector switch to Standby.
2. Start-up
• Apply power to unit
• Unit should enter
Recirculation
mode for a 10 second duration and the following should occur:
Supply fan runs in HIGH (Normal) speed
Exhaust fan remains off
3. Standby
• Following the start-up unit should enter
Standby
mode. The following should occur:
Supply fan shuts off
Exhaust fan remains off
4. LOW (Reduced) speed
• Set fans speed selector switch low speed. The following should occur.
Supply fan runs in LOW (Reduced) speed
Exhaust fan runs in LOW (Reduced) speed
5. HIGH (Normal) speed
• Set fans speed selector switch HIGH (Normal) speed. The following should occur.
Supply fan ramps up to HIGH (Normal) speed
Exhaust fan ramps up to HIGH (Normal) speed
6. Test completion
• Set fan speed selector switch to desired setting
• Installation Verification test is complete
With external control
1. Start-up
• Apply power to unit
• Unit should enter
Recirculation
mode for a 10 second duration and the following should occur:
Supply fan runs in HIGH (Normal) speed
Exhaust fan remains off
2. External control
• Following start-up unit will respond to external control
• Consult user manual/instruction provided with external controller and ensure unit responds appropriately.
3. Test completion
• Installation Verification test is complete
Installation Verification Test
Summary of Contents for fantech 14105R
Page 39: ...39 Notes ...
