System Sensor Supervised Control Module M500S Installation And Maintenance Instructions Download Page 4

SS-460-001  4 I56-3850-005 
 

 

©2011 System Sensor

Three-Year LimiTed WarranTY

System Sensor warrants its enclosed module to be free from defects in materials and 
workmanship under normal use and service for a period of three years from date of 
manufacture. System Sensor makes no other express warranty for this module. No agent, 
representative, dealer, or employee of the Company has the authority to increase or 
alter the obligations or limitations of this Warranty. The Company’s obligation of this 
Warranty shall be limited to the repair or replacement of any part of the module which 
is found to be defective in materials or workmanship under normal use and service 
during the three year period commencing with the date of manufacture. After phoning 
System Sensor’s toll free number 800-SENSOR2 (736-7672) for a Return Authorization 
number, send defective units postage prepaid to: System Sensor, Repair Department, RA 

#__________, 3825 Ohio Avenue, St. Charles, IL 60174. Please include a note describing 
the malfunction and suspected cause of failure. The Company shall not be obligated to 
repair or replace units which are found to be defective because of damage, unreasonable 
use, modifications, or alterations occurring after the date of manufacture. In no case shall 
the Company be liable for any consequential or incidental damages for breach of this 
or any other Warranty, expressed or implied whatsoever, even if the loss or damage is 
caused by the Company’s negligence or fault. Some states do not allow the exclusion or 
limitation of incidental or consequential damages, so the above limitation or exclusion 
may not apply to you. This Warranty gives you specific legal rights, and you may also 
have other rights which vary from state to state.

WARNING

All relay switch contacts are shipped in the standby state (open) state, but may have transferred to the activated (closed) state during shipping. To ensure that 
the switch contacts are in their correct state, modules must be made to communicate with the panel before connecting circuits controlled by the module.

Reviews: