Notes:
- The speaker impedance must be between 4 and 16 Ohm. If two speaker pairs are connected and run simultaneously (A+B), the impedance of the
speakers must be minimum 6-8 ohms.
- For optimal sound quality there must be a proper and firm connection between the speaker terminals and the amplifier terminals.
Ensure that all cables and
sockets are not damaged in any way and all sockets are firmly pushed home.
- The cable ends must not be frayed to avoid that they come into contact with each other or the cabinet back panel.
Be sure to connect the polarities of the
speaker system and the speaker terminals correctly (+ to +, - to -).
- When make the connection, please refer to the connection diagram. Make sure that all the units are switched off during any connection. The RCA
sockets on your SA-250 are color coded for your convenience. Red and white are RIGHT and LEFT audio respectively.
Use high quality RCA-interconnect and speaker cables for optimum performance and reliability.
11
REAR PANEL DESCRIPTION
(1) Line Out - RCA cynch output for connection of additional power amplifier, active subwoofer
or recording device
(2) AUX1: RCA cynch input for connection of optional equipment.
(3) AUX2: RCA cynch input for connection of optional equipment
(4) CD: RCA cynch input for connection of CD player
(5) DVD: RCA cynch input for connection of DVD player (Note: Analogue stereo input only).
(6) Tuner: RCA cynch input for connection of FM/AM radio.
(7-8) Speakers A left & right: For connection of main loudspeaker pair
(9-10) Speakers B left & right: For connection of additional loudspeaker pair
(11) AC input: For connection of mains voltage. Make sure that the plug is correctly
inserted, and that the voltage corresponds to the text printed on the cabinet back panel.
CONNECTIONS
