System Build Evolution 2513408COM, Manual

Page: 15 / 25

15
systembuild.com
STEP 8
Tube
You
8
(x2)
8
8
H
G
C
H
With the assistance of another person, locate and nark the studs in the wall that the cabinet will be
mounted to. Mark the location of the studs with a pencil.
Position the wall hanger (H) on the wall and mark the locations of the studs on the back rail. Drill two
3#16" diameter holes in the wall hanger (H) at the stud locations. Using a level, attach the wall
hanger (H) to the wall with two screws (8) as shown. It is important that the wall hanger is mounted to
a minimum of at least two studs. With the help of another person, place the assembled component
onto the wall hanger (H) so the two beveled edges on the back rail (G) and wall hanger (H) mate
together.
Wall to be
mounted to.