System Build 7461315COM, Manual

Page: 26 / 36

26
systembuild.com
STEP19
For Masonry, Concrete, or other
wall materials:
Consult your local hardware store
for appropriate anchors to securely
attach the safety bracket.
IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER. FOLLOW THESE
INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET PROVIDED WITH THIS PRODUCT.
OPTION 1: Attachment into a wall stud (preferred method)
Using a stud finder, locate a stud in the wall. Place your unit against the wall, with the safety bracket aligned in this
location. To make driving the screw easier, you can drill a 1/8" diameter pilot hole (3mm) through the safety
bracket into the stud. Drive the screw through the safety bracket into the wall stud. Tighten the screw that was not
fully tightened in step 5.
OPTION 2: Attachment into drywall
Locate your unit where desired against a wall and mark the wall through the safety bracket, then move your unit
aside. Drill a 3/16" diameter hole (5mm) into the wallboard. Tap the wall anchor into the hole until it is flush. Move
your unit into location and fasten the wall bracket to the wall anchor with the screw. Tighten the screw that was
not fully tightened in step 5.
14c
14d
WARNING
Serious or fatal crushing
injuries can occur from
furniture tipover.
To prevent tipover:
* Install tipover restraint
provided
* Unless specifically designed
to accommodate, do not set
TVs or other heavy objects on
the top of this product
* Never allow children to climb
or hang on drawers, door, or
shelves
Use of tipover restraints
may only reduce, but not
eliminate the risk of tipover
stud
wallboard
hole
14c
14d
If needed, adjust the adjustable legs to level your unit.