17
systembuild.com
STEP 10
Tube
You
IMPORTANT:
THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER.
FOLLOW THESE INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET
PROVIDED WITH THIS PRODUCT.
WARNING
Serious or fatal crushing injuries
can occur from furniture tipover.
To prevent tipover:
* Install tipover restraint provided
* Unless specifically designed to
accommodate, do not set TVs or
other heavy objects on the top of this
product
* Never allow children to climb or
hang on drawers, door, or shelves
Use of tipover restraints may
only reduce, but not eliminate the
risk of tipover
For Masonry, Concrete, or
other wall materials:
Consult your local hardware store
for appropriate anchors to
securely attach the safety
bracket.
OPTION
1:
Attachment
into
a
wall
stud
(preferred
method)
Using
a
stud
finder,
locate
a
stud
in
the
wall.
Place
your
unit
against
the
wall,
with
the
safety
bracket
aligned
in
this
location.
To
make
driving
the
screw
easier,
you
can
drill
a
1/8"
diameter
pilot
hole
(3mm)
through
the
safety
bracket
into
the
stud.
Drive
the
screw
through
the
safety
bracket
into
the
wall
stud.
Tighten
the
screw
that
was
not
fully
tightened
in
step
3.
OPTION
2:
Attachment
into
drywall
Locate
your
unit
where
desired
against
a
wall
and
mark
the
wall
through
the
safety
bracket,
then
move
your
unit
aside.
Drill
a
3/16"
diameter
hole
(5mm)
into
the
wallboard.
Tap
the
wall
anchor
into
the
hole
until
it
is
flush.
Move
your
unit
into
location
and
fasten
the
wall
bracket
to
the
wall
anchor
with
the
screw.
Tighten
the
screw
that
was
not
fully
tightened
in
step
3.
(x1)
#A84050
stud
wallboard
hole
option 1
option 2
