System Build 6383337COM, Manual

Page: 20 / 44

20
systembuild.com
STEP 11
(x44)
#A21110
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT
AND MUST BE INSTALLED PROPERLY.
Assure that your unit is square.
Distance from corner to corner
must be equal as shown.
Flush bottom edge of the
Lower Back Panel with the
bottom edge of bottom (D).
13
13
Carefully turn the cabinet over on it's front side. Position Upper Back
Panel as shown. Align squarely with outer edges. Flush bottom edge
of Upper Back Panel with bottom edge of Center Fixed Shelf (E) and
nail straight into back edges of Left Panel, Right Panel & Top. Position
Lower Back Panel as shown. Align squarely with outer edges. Flush
bottom edge of Lower Back Panel with bottom edge of Bottom (D)
and nail straight into back edges of Left Panel, Right Panel, Bottom
& Center Fixed Shelf.
M
N
raw
surface
raw
surface
D