background image

Power is supplied via a 3-pole Phoenix socket of type DFK-PC /3-

GF-7,62. The corresponding plug carries the designation Phoenix Con-

tact PC 4/ 3-ST-7,62.

Fig. 17: 3-pole Phoenix Contact socket for the power supply

Pin

Designation

Significance

1

PE

Surge protectors

2

L

Phase

3

N

Neutral conductor

3.6  Conformity

Systec & Solutions GmbH
WAVE 219-221-224-232-255
Industrie-PC/-Monitor

n

ZWECK
Für das o.g. Erzeugnis in der Ausführung mit einer Versorgungss-

pannung von 12 – 24 V DC wird hiermit bestätigt, dass es den

wesentlichen Schutzanforderungen entspricht, die in der Richtlinie

2004/108/EG über die elektromagnetische Verträglichkeit festge-

legt sind.
Das o.g. Erzeugnis in der Ausführung mit einer Versorgungsspan-

nung von 100 – 240 V AC entspricht außerdem den Bestimmungen

der EG-Richtlinie 2006/95/EG über die Niederspannung.

n

GELTUNGSBEREICH
Oben aufgeführtes Produkt erfüllt die Anforderungen der EMV

Richtlinie 2004/108/EG auf Basis der folgenden Normen:
– EN 55022:1998 + A1:2000 + A2:2003 Class A
– EN 55024:1998
– EN 61000-6-2:2005
– EN 61000-4-2:2007

Oben aufgeführtes Produkt erfüllt die Anforderungen der Richtlinie

2006/95/EG auf Basis der folgenden Norm:
– EN 60950-1:2006

n

BESCHEINIGUNG
Die Einhaltung der Schutzanforderung wurde festgestellt am all-

seitig geschlossenem Gehäuse.

Power supply in the low-voltage

range (100 – 240 V AC, 50 – 60 Hz)

Konformitätserklärung

Product description

Conformity

WAVE 221 PC - Industrial PC

 

 19

Summary of Contents for WAVE 221 PC










































Reviews: