HDMI2.0 KVM Matrix Switcher
10
2.2. Wiring
1. Connect the HDMI sources (such as PC) to the HDMI IN 1-4 ports.
2. Connect HDMI display device (such as TV, projector, LED/LCD display) to
the HDMI OUT 1-2 ports.
3. Connect HDBT receivers (such as
SCT-HDBT3KVM-TRX) to HDBT OUT
ports, and connect displays to the receivers.
4. Connect HDBT receivers (such as
SCT-HDBT3KVM-TRX) to HDBT OUT
ports, and connect displays to the receivers.
5. Connect USB host PCs to USB HOST 1-4 ports of the device, and connect
USB devices (such as USB camera, Keyboard & Mouse) to USB 1-1/2,
USB 2-1/2 ports of the device and USB ports of the connected HDBT
receivers.
Note:
a) If the connected HDBT receiver is connected to multiple USB devices
or high-power USB devices, users need to connect a separate power
supply to the receiver.
b) By default, USB control is in sync mode, USB Host 1-4 ports are bound
with HDMI IN 1-4 respectively. When select one source from HDMI IN
1-4 for HDMI/HDBT OUT 1 or HDMI/HDBT OUT 2, the USB devices
connected to USB DEVICE 1-1/2 ports and HDBT receiver 1 or USB
DEVICE 2-1/2 ports and HDBT receiver 2 will be connected to the
corresponding USB host bound with the selected source.
c) Through API commands and Web UI, USB Control can be set to
independent mode and users can set USB devices to be connected to
any USB host. For example, select HDMI IN 1 as input source for
HDMI/HDBT OUT 1. Users can connect USB devices connected with
USB DEVICE 1-1, 1-2 and HDBT receiver 1 to any USB HOST such as
USB HOST 2. (Detail information, please refer to the separate
document “
API Command Set_SCT-MXKVM42-H2U3
” or “
” section)
