19 " STD
A
"B"
Top cover
Backdoor
Front Door (Plastic)
Lateral Cover
Interior fan cover
Cable
Exit
Hinges
Racks
Lock
Base
Rubber Plug (X4)
Built-in handle
Screw 1/4X1 1/2 " (X6)
Hinges
Base Cover
(Removable)
DETAIL A
Guiding slots for slots
rack distance adjustment
(Up and Down)
Introduction
Thanks for selecting our Cabinet with 19” STD rack
SR19028FV2. The information in this manual will help
you assemble then product in addition to showing you
all the physucal characteristics, included parts
and recommendations.
Recommendations
Start installing the device(s) only after assembling the
cabinet.
When assembling the cabinet do not fully tighten the screws
and nuts, once everything is assembled proceed to
to tighten the screws and nuts.
Necessary Tools for Assembly
-2 | 7/16" open end wrenches
-1 | 3/8" open end wrench
-1 Phillips screwdriver(Crosshead)
-1 English wrench
Installation/ Operation Mode
Steps:
1.-First select on the cabinet base
2.-Install the racks on the base
3.-Install lateral covers on the racks and base
4.-Install the interior fan cover on the top of the racks
5.-Install the top cover
6.-Install the doors and their hinges
12 Phillips conic screws 10-32 (Equipment for Rack)
Included hardware for equipment installation
12 Hex nuts for rack (Equipment for Rack)
12 Nylon conical washers (Equipment for Rack)
8 Screws 5/32X2 (vents)
8 Screws 5/32 (vents)
8 Flat washers (vents)
Physical Characteristics
·
Exterior dimensions:
(Width X Height X Depth): 550 X 828 X 634 mm
·
Weight: 30 Kg.
·
Color:
Black
