CONTROL AND CONNECTIONS/DAY&NIGHT
IN/ALARM OUT TERMINALS
GND
1-1. DAY&NIGHT EXTERNAL INPUT (1pin)
Switches the cameras D/N mode to either Day or Night based on the input status. Refer to the
diagram below. The cameras D/N mode must be set to EXT for this to function.
2
1
Open contact: DAY
Close contact: NIGHT
1-2. Common/Ground – Used for D/N and Alarm connections
1-3. ALARM OUT
Motion detection signals are output through this port. Active state is High.
Normal : Low, ALARM : High.
1-4/5. CAMERA CONTROL
(Option)
2. POWER INPUT TERMINAL
~ AC 24V ~
In DC power, use the Adapter mode than DC 12V 500mA Capacity.
3. VIDEO OUT CONNECTOR
BNC : This BNC connector provides a 1.0Vp-p/75 ohms composite video Signal.
17
1. Terminal Block
(GND)
(Option)
AC 100-240V
It is recommended to use the DC power supply that can support
inrush current over 0.55A.
AC Power Cord -
This power cord accepts a 100-240V ~ 50(60)Hz
±
1Hz
.
