3
1. Back focus Lock Screw
– Allows the user to secure the backfocus
setting.
2. C/CS Back focus Adjust Ring
– Allows the user to adjust the back focal
length or picture focus by rotating this ring clockwise for C-mount and
counter-clockwise for CS-mount lenses.
3. Mounting Bracket Hole
– This threaded ¼"-20 hole is used to mount the
camera onto a mounting bracket or tripod.
4. Iris Adjustment Pot (Potentiometer)
– This control allows the user to
adjust the level of the auto iris when the A/I lens selection switch is set to
DC and a DC lens is mounted on the camera. The switch should be in
the video position when an auto iris video lens is mounted on the camera.
If a video auto-iris lens is used, this control has no function.
5. Power LED
– This green LED illuminates while power is supplied to the
camera.
6. Auto-iris Lens Connector
– This four-pin female connector supplies the
power and either video signal or DC control signal to the auto-iris lens.
7. Function Switches
– This compartment houses switches for camera
operation. A switch is in the ON position if it is positioned toward the front
of the camera. If the position is set toward the back of the camera, the
switch is OFF. The switches include:
