- 8 -
Input for power cord connected to electrical outlet.(100V - 240V)
6. AC/IN
6. AC/IN
7. VIDEO A(IN/OUT)
connector
Rear Panel
There are four BNC connectors for the composite VIDEO A input and output.
7. VIDEO A connector
Note :
Caution :
The impedance is automatically set to 75 ohm by the input of a signal
on the input connector while operating in a single connection mode.
However, if a cable is connected to the output connector, the
connection is placed into the open status by the multiple connection
and high impedance automatically selected.
Do not leave an unused cable connected to the monitor. If a single
cable is used then it must be connected to the input connector for
the 75 ohm auto-termination selector to function properly.
