SY210NT Serial Controller Quick User Guide Manual
© 2004 by SYRIS Technology Corp.
- 6 -
Scan communication from controller (plug & play)
Enter key
LCD display
Reference
MENU System
EN Login
▼
＊３
Module
Process
EN
ADD
Module
▼
＊３
Module
PlugPlay
Scan module communication item
EN
Module
Waitting
Scanning communicated module
Please wait
Find
：
01
OK
Display communicated module
amount(annotate)
CLR
Module
PlugPlay
Setup complete, back to item
Annotation:
The controllers will automatically display the plug & play result. In normal status, the display
module amount will match with the practical installed module amount. In another word, the
scan result should display: Find: 04 OK. If the display amount is unusual, please refer the
below table to eliminate the issue.
Unusual
situation
Scan (display 00)
or
display less amount
Possibility
The communication is not correct or repeat ID
Eliminate
method
◎
Please confirm the communication again
◎
The factory default of reader ID all set to “1”. The ID did not setup
properly when communicated with multiple reader or ID repeat cause
transmission conflict and can not find the module correctly.
Please contact with the Syris technical personnel if confirm the above questions but still can
not communicate correctly.
