SMG1002-2S VOIP Gateway (SIP) Installation
Manual VER 1.0
3
LAN
Device configuration interface, when in the 10M Ethernet port rate, the green light, orange light
off; When working in the 100M Ethernet port speed, green and orange lights are on, when the
flow of data out of date, the green light, orange lights flashing.
1-2
FXS connected to a telephone or PBX trunk interfaces.
Table 1-2 Rear panel connectors and LEDs
Hardware Connection
Firstly, using the power supplied in the package box to connect SMG1002-2S to power on it. And WAN port
SMG1002-2S Series integrated access devices connected to the hub or switch, as shown in Figure 2-1.Making
SMG1002-2S to connect with the service network, and then connecting the PC to the LAN port of SMG1002-2S,
making data configuration for SMG1002-2S and Port1-2 connected to the phone.
Figure 2-1 SMG1002-2S
Series Integrated Access Device as a proxy server connection
Basic WEB Settings
Entering the Web interface to configure the SMG1002-2S . The default of LAN port address is 192.168.11.1.