Synway FXM32 Hardware Manual Download Page 7

                                                                                                             

Synway Information Engineering Co., Ltd

 

 

channel while the enhanced motherboard supports 1024 point (128ms). 

3) 

Uses the DSPs on the motherboard to process echoes, not wasting any host resources. 

4) 

Not only cancels out the effect of voice playback on DTMF and busy tones detection, but 

also avoids self-excited oscillation and howling, minimizes the possibility of registering 

wrong DTMF and busy tones in a conference call, especially suitable for VoIP application 

environments. 

z

 

DMA 

Uses the DMA technique for data reading and writing, greatly minimizing the cost of host CPU.

 

z

 

Structure 

1) 

Assembles piecemeal just like piling up building blocks. A motherboard offers 4 channels 

and you may use the backboard to extend with up to 7 daughterboards. Then 32 

channels are available in total. Although these daughterboards take some space, they 

can work without the need of PCI/PCIe slots. 

2) 

Several kinds of modules are optional for you to install with the mother/daughter boards 

to achieve different purposes. Actually, we provide FXS, FXO and FXC (a compound 

body of FXS and FXO). FXC has the capability to ensure safe communication even when 

the PC is powered off, which eliminates the damage caused by sudden power cuts. 

3) 

The 2U height and the half-length design (Height: 55mm, Length: 120mm) minimize the 

space it needs for installation, allowing a great many choices of mainboards and main 

frames. 

4)  You are allowed to fix the module by bolt and the backboard by ouch onto the 

mother/daughter board to prevent them from loosening or disengaging during 

transportation or in removal. 

z

 

Compatibility in Software and Hardware 

1) 

Compatible with all commercial and home mainboards. 

2)  Includes PCI 2.2 bus with burst data transmission rate up to 132 MB/s; PNP (plug and 

play) feature eliminates the need for jumper leads; general PCI design supports 3.3V/5V 

PCI slot and PCI-X slot.   

Includes PCI Express 1.0a bus with the single-way transmission rate up to 2.5Gb; 

supports PCI Express X1, X2, X4, X8, X16 slots. 

3) 

Supports Unix, Linux and Solaris. 

4)  This board driver is compatible with Zaptel. So it supports a lot of open source PBX 

systems, like Asterisk, Trixbox, Yate, CallWeaver, FreeSwitch, etc. 

z

 

Interface 

The on-board RJ11 jack can connect directly to telephone lines, making connection easy and 

Synway FXM32 Analog Voice Board Hardware Manual (Version 1.0)                                                           

   

 Page 2 

Summary of Contents for FXM32





















Reviews: