Note:
If the current device has N channels, the device to be synchronized has M channels and M
, only the first N channels will be synchronized,
with the parameters on the other M-N channels unchanged.
Figure 3-55 Synchronization Interface
To delete a slave device from the device list for centralized management, tick the checkbox before
the device in Figure 3-52 and click the
Delete
button.
To restart the devices under centralized management at one time, tick the checkbox before the
devices in Figure 3-52 and click the
Restart Service
or
Restart System
button. This feature is
important especially for parameter configurations (including the configuration via synchronization).
Only after the reboot of recording service will the parameter modifications (except those in
) go into effect .
Check All
means to select all available items on the current page;
Uncheck All
means to cancel
all the selections on the current page.
3.11.2 Master/Slave Settings
Figure 3-56 Master/Slave Settings Interface
ATP2410 User Manual (Version 4.0.0.0)
Page 47
