SYNTHESIS TECHNOLOGY
PAGE
6
MOTM-650 USER’S GUIDE
WWW.SYNTHTECH.COM
MIDI Clk
,
Ext. Reg
, or
Ext. Irr
. Select
MIDI CLK
, and press
ENTER
. The display should
show:
Clock
M
ID
I
Clk
…and
MIDI Clk
should be steady. You’ve just changed the clock source from the 650’s
internal clock to MIDI clock. This is how any setting is changed – press
ENTER
to edit the
setting, use
INC
or
DEC
to choose an option or set the value, and press
ENTER
again to tell
the MOTM-650 to store the change.
Let’s try one more aspect of the MOTM-650’s user interface – With the display showing
Clock MIDI Clk
, press
ENTER
again.
MIDI Clk
will begin to flash. Use
INC
or
DEC
to
select
Internal
on the display, but instead of pressing
ENTER
, press
ESC
instead. The
display will show:
Clock
M
ID
I
Clk
This allows the user to back out of a change before it becomes permanent, and the setting
will be set back to whatever it was before the change was made.
In short, press
ENTER
to edit a setting, change the setting with
INC
or
DEC
, then press
either
ENTER
to select the change or
ESC
to cancel it. All the settings work this way!
Keep in mind that the entire MOTM-650’s user interface works just as above, regardless of
function or feature.
Note that all MOTM-650 setting changes can be transmitted via MIDI. This is useful when
a live performance is being done and a recording of all front panel changes is desired.
All settings are stored in internal flash memory. Once a setting change is made, it’s saved
across power cycles. The MOTM-650’s entire active state is saved in nonvolatile memory.
