SYNTHESIS TECHNOLOGY
PAGE
23
MOTM-110 ASSEMBLY
WWW.SYNTHTECH.COM
CONTROLS
CV MOD
Attenuates the signal fed into the CV jack.
GAIN
Adds an initial DC voltage to the attenuated CV signal.
The sum of the GAIN voltage and the CV voltage is
used to control the VCA.
UNBAL
Adds a DC offset (unbalance) to the Y input of the ring
mod.
X LEVEL
Attenuates the signal fed into the X IN jack.
Y LEVEL
Attenuates the signal fed into the Y IN jack.
X AC/DC
Couples the X IN signal either AC or DC.
Y AC/DC
Couples the Y IN signal either AC or DC.
