DePuy Synthes
21
1
Make stab incision
Instruments
324.022 Drill Sleeve for LISS Insertion Guide
324.027 Trocar, length 162 mm, for No. 324.022
Make a stab incision and insert the trocar through the drill
sleeve.
2
Determine screw length
The length of the condylar screws can be deduced from the
table on page 9.
Use screws of 26 mm length in the diaphyseal region.
Options
− In case of very thick cortex, pre-drill by using the pulling
device (324.033) or the drill bit
⭋
4.3 mm (310.423).
− The insertion of the initial screw tends to push the bone
medially, especially in case of dense bone and/or unstable
reductions. The pulling device helps to solve this problem
(see page 32).
