![Syntax S740M Manual Download Page 34](http://html1.mh-extra.com/html/syntax/s740m/s740m_manual_1421215034.webp)
30
rates may be required in certain system designs to support loose layouts or
slower memory.
Graphic Win Size (128M)
This setting controls just how much system RAM can be allocated to AGP for
video purposes.
IO APIC Support (Enable)
This item allows you to enable or disable the APIC (Advanced Programmable
Interrupt Controller) mode. APIC provides symmetric multi-processing (SMP)
for systems, allowing support for up to 60 processors.
SDR/DDR CAS to Latency (2.5T)
This item determines the operation of the SDR/DDR memory CAS (column
address strobe). We recommend that you leave this item at the default value.
Share Memory Size (32 MB)
This item allows you to select the shared memory size for VGA usage.
Power Management Setup
The Power Management Setup Menu option is used to change the values of
the chipset registers for system power management.
Power Switch Type (On/Off)
This option specifies how the power button is used. In the Suspend mode, the
hard disk motor is spindled down, the monitor is shut down, and the processor
clock is stopped.
ACPI Aware O/S (Yes)
Set this option to Yes to enable Advanced Configuration and Power Interface
(ACPI) BIOS for an ACPI-aware operating system.
ACPI Standby State (S1)
This item allows you to select the standby type under ACPI operating system.