getting started
1
3
Synrad
Firestar ti-Series
operator’s manual
Unpacking
The
Unpacking
section includes subsections:
■
Incoming inspection
■
Packaging guidelines
Incoming inspection
Upon arrival, inspect all shipping containers for signs of damage. If you discover shipping damage,
document the damage (photographically if possible), then immediately notify the shipping carrier and
SYNRAD, Inc.
The shipping carrier is responsible for any damage occurring during transportation from SYNRAD, Inc. to
your receiving dock.
Packaging guidelines
■
To prevent equipment damage or loss of small components, use care when removing packaging materi-
als.
■
After unpacking, review the
Inventory
section and verify that all components are on hand.
■
Do not lift or support the laser using the cooling fittings; lift the laser by the mounting feet or base-
plate only.
■
Save all shipping containers and packaging materials, including covers and plugs. Use these special-
ized packing materials when shipping the laser to another location.
■
When packing a laser for shipment, be sure to remove all accessory items not originally attached to
the laser including beam delivery components, cooling tubing, fittings, etc.
■
Refer to the
Firestar ti-Series packaging instructions
drawing in the Technical Reference chapter for
details on packaging the laser using SYNRAD-supplied shipping materials.
■
When shipping water-cooled lasers, remember to drain all cooling water from the laser and then cap
open fittings to prevent debris from entering the coolant path.
