3
QSG Diode Pointer Ver 2.1
a Novanta company
Diode Pointer Quick Start Guide
Electrical:
6.1
Remove the laser’s faceplate.
6.
If your laser provides a power connection for the Diode Pointer, install the supplied power cable by
removing the faceplate of the laser (and the hex nut on the cable), connect the cable by the 5 VDC jack,
reinstall the hex nut on the outside of the faceplate affixing the cable. Re-install the face plate and refer
to the prior page for mounting.
6.2
Locate the laser’s 5VDC jack shipped with
your unit. Remove the hex-nut on the
cable and set it aside.
6.3
Insert the cable through the face plate
power port, and re-install the hex nut.
6.4
Connect the cable to the 5 VDC jack.
6.5
Mount the diode pointer to the faceplate.
ti-Series shown
