Synopsys DesignWare ARC AXC003, User Manual, Page: 91 / 145

91
Bare-Metal Package DesignWare ARC AXC003 CPU Card User Guide
Version 6323-018 Synopsys, Inc.
May 2017
6. In Command-line Options > Debugger Options, enter a property to select the
correct core and device:
-prop=cpunum=1
select the ARC CPU (see Table 39).
–prop=dig_device=AXS
selects the USB data port
Table 39 Property Arguments for Selecting the CPU Core in the Debugger
Option Description
-prop=cpunum=1
Select ARC HS36 core
-prop=cpunum=1
Select ARC HS38x2 core 1
-prop=cpunum=2
Select ARC HS38x2 core 2
If you are using a Digilent probe (rather than the USB data port) set one of the
following options depending on the type of your probe:
-prop=dig_device=JtagHs1
or
-prop=dig_device=JtagHs2
Debugger options
– Command-Line Options
7. In Debugger Options sub-tab Target Selection, select the correct settings for your
debug probe. Figure 49 on page 92 explains this using the example of the USB data
port: Select the Digilent JTAG cable option and set the JTAG wire protocol: