22
Chapter 4: Maintenance and Expansion
1
Shut down your RackStation. Disconnect all cables connected to your
RackStation to prevent any possible damage.
2
Open the RackStation by following step 2 of
.
3
Insert the new memory module in the slot:
a
Push the retaining clips on the slot out to the sides.
b
Align the notch on the gold edge of the module with the notch in the
memory slot.
c
Push down on the memory module with firm and even pressure. The
retaining clips will snap into position as the module is correctly inserted.
Note:
Hold the memory module by its edges, and do not touch the gold
connectors.
4
Put back the top cover by following step 4 of
.
