Synology NAS FS6400, Hardware Installation Manual, Page: 12 / 32

12
Chapter 2: Hardware Setup
3 Remove the beam:
a
b
a
a remove the 4 screws at both sides of the chassis.
b
Pull up the beam, and put it aside.
4
Remove the 3 screws that secure the ventilation duct cover, pull up the ventilation duct cover, and put it aside.
5 Insert the new memory module in the slot:
a
Push the retaining clips on the slot out to the sides.
b
Align the notch on the gold edge of the module with the notch in the memory slot.
c Push down on the memory module with firm and even pressure. The retaining clips will snap into position as
the module is correctly inserted.