7
Chapter 2: Set up Your Synology Wi-Fi Router
3
Connect wireless client devices to your MR2200ac:
a
When the Wi-Fi Signal LED indicator turns blinking blue, MR2200ac is ready to connect to other devices.
b
Use your wireless device to scan and join the Wi-Fi network created by your MR2200ac.
Note:
Below are the default credentials for the Wi-Fi network:
1. Wi-Fi SSID:
Synology_
serial number
2. Password:
synology
The default credentials can be changed during the initial SRM setup.
Set up MR2200ac as Additional Wi-Fi Point
1
Connect one end of the power adapter to the power port on your MR2200ac, and the other end to the power
outlet. Press the power button to power on your MR2200ac. Wait for around two minutes until the STATUS
LED indicator starts blinking blue.
2
Log in to
Synology Router Manager
(SRM) on the
primary Wi-Fi point
, and go to
Wi-Fi Connect
>
Wi-Fi
Point
to add your MR2200ac to the Wi-Fi system.
Note:
When setting up MR2200ac as Additional Wi-Fi Point, make sure your primary Wi-Fi point (either RT2600ac or
MR2200ac) is running SRM 1.2 or above.
Summary of Contents for MR2200ac
Page 1: ...Synology Wi Fi Router MR2200ac Hardware Installation Guide...
Page 30: ...1 2 3 MPE 1mW cm2 0 814 mW cm2...
Page 31: ...B VCCI...
