7
Chapter 2: Hardware Setup
3
Load drives in the drive trays.
For 3.5” drives:
Remove the fastening panels from the sides of the drive tray. Place the drive in the drive
tray. Then insert the fastening panels to secure the drive in place.
For 2.5” drives:
Remove the fastening panels from the sides of the drive tray and store them in a safe
place. Place the drive in the blue area (shown below) of the drive tray. Turn the tray upside down and
tighten the screws to secure the drive in place.
4
Insert the drive tray into the empty drive bay. Press the handle inward until it clicks into place.
5
Insert the included tray key into the tray lock. Turn the key clockwise (to the
"I"
position) to lock the handle.
Remove the key.
6
If you have prepared a second drive, repeat the steps above to install it.
