NVMS Storage Server User Manual
3
No.
Description
No.
Description
1
Management
interface
(IPMI2.0)
5
USB3.0 interface
2
USB2.0 interface
6
VGA interface
3
RJ45 Ethernet interface
7
RS232 interface
4
HDMI port
8
Power Connector*
*Power connector: one power supply or double power supplies can be optional for 24-disk storage
servers. The above pictures are for reference only. The actual product shall prevail.
1.3
HDD Installation
①
Press the blue button, hold the pull rod to pull out the HDD case and then install the HDD into
the case.
②
Fix the HDD by tightening the screws on both side of the case.
③
Push the case with the HDD into the slot.
④
Fasten the pull rod.
2
Default System Configuration
The default network configurations of the server are as follows:
Network Card 1-IP:
192.168.0.10
Network Card 2-IP:
192.168.0.11
Network Card 1-IP:
192.168.0.12
Network Card 2-IP:
192.168.0.13
Http Port:
8000
To avoid IP conflict you should configure storage servers one at a time as these storage servers have
the same default network configuration.
