22
www.synexis.ca
+1 844-352-7680
Inspecting Your Synexis System
After carefully opening the carton, unpack and inspect your Synexis Blade Inline System.
✔
No damage to the bulb
✔
No damage to the Sail holder
DO NOT INSTALL THIS UNIT IF ANY DAMAGE IS NOTED.
If the unit is damaged, contact your distributor or Synexis Technical Support for guidance.
Prior to Installation
To ensure optimal performance, inspect ductwork prior to installation.
✔
Clean diffusers and ductwork
✔
Proper level of airflow with no obstructions
✔
Dampers not located upstream within six feet of the Synexis system
✔
Dampers not located downstream between the Synexis system and diffuser
Tools for Installation
✔
Hole saw or step bit
✔
Tin snips or sheet metal shears
✔
Drill or impact driver
✔
1/4″ hex driver bit
✔
Scissors for trimming duct template
Recommended Installation Materials
✔
Foil or duct tape
✔
Insulation
