Fig 1. Fig.2 Fig.3
Abductor Block – 010-132
Put the buckle, which is sewn onto the bottom part of the block, through one of two holes on the
seat, and secure the block using Velcro. (Place zipper outwards).
Headrest Adjustable (Pair) – 010-131
Different positions are possible with the headrest. Adjust the headrest height by changing the
shorter Velcro straps (underneath) between the different backrest holes. Before securing the
headrest onto the backrest, set the headrest width.
Headrest Width -. Unfasten the metal snaps on the back of the cushion and pull the headrest
cushion off of the side straps. Rotate the cushion 180 degrees and insert the side belts again. Then
refasten the cushions using the metal snaps on the back of the cushion.
Highest Position - The shorter Velcro straps (underneath) go through the top holes of the backrest
and the longer Velcro straps (at top) flip over the edge of the backrest. The belts on back of the
backrest are secured by metal snaps.
Lowest Position -The shorter Velcro straps (underneath) go through the appropriate holes at the
base of the backrest and the longer Velcro straps (at top) go through of backrest base over top of
the shorter straps. The straps on the backrest are then secured with metal snaps.
13
