VelaShape III User Manual Cellulite and Circumference Treatment
PB81499EN
55
Cycle # 2:
In this cycle, the same sub-area set (A1-A20) will be started and treated with two
consecutive stacked pulses using the “
V
e
r
t
i
c
a
l
S
n
a
k
e
-
L
i
k
e
” treatment technique
(see Figure 39) until the surface temperature reaches 43-45°C or the patient
cannot tolerate further heat.
Figure 39: Cycle 2 “
V
e
r
t
i
c
a
l
S
n
a
k
e
-
L
i
k
e
”
Cycle # 3:
In this cycle, the same sub-area set (start from sub-area A1 to A20) will be started
and continued with two consecutive stacking pulses (same as in Cycle # 2) using
the “
H
o
r
i
z
o
n
t
a
l
S
n
a
k
e
-
L
i
k
e
” treatment technique until the surface temperature
reaches 43-45°C or the patient cannot tolerate further heat.
Cycle # 4 (Optional):
If the total time duration of Cycles # 1, 2 and 3 is less than 15 minutes, continue
with the “
V
e
r
t
i
c
a
l
S
n
a
k
e
-
L
i
k
e
” treatment technique (see Figure 39) and apply
one pulse per sub-area until the 15-minute treatment duration for all four cycles is
reached.
Note
When coupler agent is added over the treatment area, continue
treatment when an additional stacking pulse is added to the current
number of consecutive pulses used prior to adding the coupler; for
example, if coupler agent is added at the stage when two consecutive
pulses are being applied at each sub-area, the treatment should be
continued with three consecutive pulses. When the whole area is
completed with the three consecutive pulses, the treatment will
continue with two consecutive pulses.
Summary of Contents for Candela VelaShape III
Page 1: ...System User Manual PB81499EN ...
Page 2: ......