E n h a n c e |
T e c h n o l o g y , I n c .
3.4 LCM
LCM (LCD Control Module): The LCM has four buttons:
c
(up),
d
(down),
ENT
(Enter), and
ESC
(Escape). These are used to control LCM functions.
c
and
d
are pressed to scroll through the functions and options.
ENT
is pressed to enter functions and to accept selections.
ESC
is pressed to exit to previous menu. Holding
ESC
will jump back to main
menu.
After the system boots up, the following screen will be shown on the LCM:
Enhance Tech.
↵
There are 6 functions accessible by the LCM:
Alarm Mute
,
Reset/Shutdown
,
Quick Install
,
View IP Setting
,
Change IP Config
,
and
Reset to Default
.
Alarm Mute
Select
Alarm Mute
to mute the alarm.
Reset/Shutdown
Select
Reset
to restart the controller without powering
down.
Select
Shutdown
to prepare controller for shutdown prior
to powering off.
Before powering off system, it is recommended to do
Shutdown
from the controller to clear the data from
cache.
Quick Install
Select
Quick Install
to setup a RAID array from the
available drives. Please see Appendix for RAID level
definitions and minimum requirements for each RAID
level.
View IP Setting
Select
View IP Setting
to display current IP address, IP
subnet mask, and IP Gateway.
Change IP Config
Select
Change IP Config
to modify IP address, IP subnet
mask, and IP Gateway.
Reset to Default
Select
Reset to Default
to reset to original manufacture
settings. The login and password will return to default:
admin:1234
, and the IP address to default:
192.168.0.1
EnhanceRAID R4 XP User Manual
- 14 -
www.RackmountMart.com
email : [email protected]
SYNERGY GLOBAL TECHNOLOGY INC
1-888-865-6888