Synergy iOSD User Manual Download Page 12

Page: 12 / 17

Firmware & Assistant Software Upgrade

Please follow the procedure for firmware upgrade; otherwise the iOSD might not work properly.

Make sure your computer is connected to the Internet. Please close all the other applications during the

firmware upgrade, including anti-virus software and firewall.

Make sure the power supply is securely connected. DO NOT un-plug the power supply until firmware upgrade

has finished.

Connect the iOSD to PC with Micro-USB cable, DO NOT break connection until firmware upgrade is finished.

Run the assistant software and wait for connection.

Select Info



Software and Firmware.

DJI server will check your current software and firmware version, and get the latest software and firmware

prepared for the unit.

If there is a software version more up-to-date than your current version, you will be able to click to download the

new version. Please re-install the assistant software follow the prompts

If there is a firmware version more up-to-date than your current version, you will be able to click to update them.

Wait until Assistant software shows “finished”.

10.

Click OK and power cycle. Your unit is now up-to-date.

Note:

If firmware upgrade failed, the iOSD will enter waiting for firmware upgrade status automatically, please try again

with the above procedures.

Summary of Contents for iOSD

















