background image

FURNITURE CARE INSTRUCTIONS   (cont.)

IN GENERAL:

• Protect furniture surface from hot or extremely cold items.
• Use coasters under hot or cold beverages.
• Do not use synthetic fabric under accessories or lamps.
• Protect tops from pens, markers and crayons.
• Oils from potpourri and other scented items can damage the finish of the furniture.
• Do not drag items across the surface of the furniture.
• Allow the surface to breath by rotating your accessories and lamps.
• Do not over polish the furniture, do it only two or three times a year. Over polishing 

can distort the natural finish of the product.

• Do not wax the furniture, as wax build up can destroy natural finish of the product.
• When moving furniture always lift the unit. Do not push or drag it to avoid damage 

to legs.

• Keep the furniture level so doors and drawers open and close freely.
• Clean with a damp, not wet, cloth. Use only a mild soap. Do not use the abrasive 

cleaners.

• Do not scratch or chip the finish.
• Inspect the product periodically, contact 

Dream On Me

 for replacement parts or 

questions.

• Do not store the product or any parts in extreme temperatures and conditions such 

as a hot attic or a damp, cold basement. These extremes can cause a loss of 
structural integrity.

• To preserve the luster of the high-quality finish on your product, it is recommended 

to place a doily or felt pad under any items you place on the finish.

• Clean with a damp cloth, then a dry cloth to preserve the original luster and beauty 

of this fine finish.

• Do not use abrasive chemicals.
• Do not spray cleaners directly onto furniture.
• Lift slightly when moving on carpeting to prevent leg breakage.
• Use of a vaporizer near furniture will cause wood to swell and to peel.

YOU DID IT!

Congratulations Mom & Dad!

It's time to create your dream nursery. A safe, elegant 

handcrafted crib that grows with your little one.

Summary of Contents for Convertible Crib





















Reviews: