manualshive.com logo in svg

Synergy Global Technology RAC141, User Manual

Share
Download
Synergy Global Technology RAC141 User Manual Download Page 49

 

   

E n h a n c e   |  

 

 

  EnhanceRAID R4 User Manual

 

  - 48 -         

 

A.2 RAID Explained 

 

RAID 0 

Disk striping of any number of drives. 

Minimum of 2 disks. 

RAID 1 

Disk mirroring of 2 disks. 

N-way 
mirroring 

Disk Mirroring of N disks. 

Choose N number of disks and set as RAID 1 array. 

RAID 3 

Striping with parity on the dedicated disk. 

Minimum of 3 disks. 

RAID 5 

Striping with interspersed parity over all member disks. 

Minimum of 3 disks. 

RAID 6 

2-dimensional parity protection over all member disks. 

Minimum of 4 disks. 

RAID 0+1 

Mirroring of RAID 0 volumes. 

Minimum of 4 disks and array needs to consist of even number 
of disks. 

RAID 10 

Striping over RAID 1 volumes. 

Minimum of 4 disks and array needs to consist of even number 
of disks. 

RAID 30 

Striping over RAID 3 volumes. 

Minimum of 6 disks. With 6 disks, two arrays of RAID 3 are 
striped into one array as RAID 30. 

RAID 50 

Striping over RAID 5 volumes. 

Minimum of 6 disks. With 6 disks, two arrays of RAID 5 are 
striped into one array as RAID 50. 

RAID 60 

Striping over RAID 6 volumes. 

Minimum of 8 disks. With 8 disks, two arrays of RAID 6 are 
striped into one array as RAID 60. 

JBOD 

The abbreviation of

 “J

ust a

 B

unch 

O

f 

D

isks

”

. JBOD will set the 

disks as individual disks. 

 

  EnhanceRAID R4 User Manual

            

www.RackmountMart.com

email : [email protected]

SYNERGY GLOBAL TECHNOLOGY INC

1-888-865-6888

Summary of Contents for RAC141


















































Reviews:

No comments

Brands by name

Popular brands

Load more brands