- 4 -
1 Introduction
1.1 Overview
The
LCD integrates keyboard, LCD display and touch pad in a drawer type worktable and
provides a convenient space-saving operation mode for KVM switch technology. The cover is an
LCD display, while the base is keyboard and touchpad.
This console is a control device integrating 17.3” LCD, 104 keys keyboard and touchpad mouse.
You can access multiple hosts using the LCD console while saving money and efforts.
LCD KVM console is the best choice to save time and efforts. Since all hosts can be
controlled from a single main control terminal, using the LCD Console:(1)avoids the
cost of keyboard, mouse and monitor of each host; (2) saves work space; (3) saves power;
(4)
saves the trouble of moving from one computer to another.
* For Mac and Sun hosts, USB cable must be used for connection.
1.2 Function & Features
The LCD console
is
integrated to a drawer type worktable of 1U height to facilitate rack
installation. Supported resolution
up to 3840 x 2160. It meets the 1U height of rack
specifications and can be installed into19 inch rack cabinet . No need to install additional
software or hardware.
1.3 Hardware Requirement
1.3.1 Hosts Requirement:
(1) DP, HDMI graphic card
Note: the max. resolution of the integrated LCD display is 3840 x 216, @60Hz. Make sure the
resolution of any connected computer does note exceed this resolution.
(2) USB port for keyboard and mouse.
1.3.2 Cables
(1) HDMI cable male to male
(2) Display port Cable male to male
(3) USB A Type Cable
(3) USB 2.0 Hub for peripheral USB device
