Synergy 21 T-DSL Easy Start Download Page 4

         Easy Start 

3 of 11 

Back Panel 

 

¬

 

Splitter

 

 

Telephone jack (RJ-45) to connect to your Telephone Splitter (T-DSL line). 

-

 

RESET 

 

To reset your T-DSL Router to factory default settings.(All customised settings that you 

 

have saved will be lost!)Please refer to the below footer2 on how to activate the reset 

 

function. 

®

 

ETHERNET

 

 

10/100 Base-T Ethernet jack (RJ-45) to connect to your Ethernet Network card or  

 

Ethernet Hub / Switch. 

¯

 

DC IN

 

 

To connect to the Power Adapter that comes with your package. 

°

 

POWER SWITCH

 

 

To power on or off the modem. 

 

I - indicates ON position 

     O - indicates OFF position.

 


 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

2

 

To activate the reset function: 

 

Ensure that your T-DSL Router is powered on. 

 

Use a paper clip or a pencil tip to depress the reset button and release.  At 

this point, the 

DSL 

indicator light will go off

followed by the 

ETHERNET 

indicators

The reset is in progress. 

When the 

DSL 

indicator starts blinking, it means that the reset process is 

completed. The default settings are now restored. 

 

T-DSL line is established once the 

DSL 

indicator lights up. 

 
 
 

Summary of Contents for T-DSL













Reviews: