Synel SY-760, User Manual

Page: 14 / 106

-
12
1 Front panel
32 character LCD
32 character LCD
with a back light display is located in the upper part of the front panel. Two arrow keys are located
to the right of the display panel for line up and line down maneuvering.
Alarm light
located to the left of the display. The alarm light is an LED that lights up when:
Half of the memory has been used up
If the terminal is defined as “On-Line” and has lost communication with the host (no pooling command has been
received from the host for more then the value of parameter 8 in SYS table)
The light blinks when the memory is full or when the terminal has not been programmed.
ON button
The ON button enables a 15 seconds (modifiable using program) manual operation.
Function keys
Eight function keys are located on the left, below the display, and are marked as follows: IN- ,OUT- , F1, F2,
F3, F4, F5, and F6.
Numerical keyboard
A numerical keyboard of fourteen keys, including Return, Escape, and Clear is located in the lower center of the
front panel.
Biometric fingerprint reader
A Biometric fingerprint reader of FPU-s or Mv1200 type which supports thousands fingerprint templates for verifica-
tion and identification. FPU is minutia based and uses the following technology:
•
Optical sensor
•
Capacitance sensor
•
Authentec sensor
Internal reader
Internal badge reader/bar code/proximity reader.