SYNEL Industries LTD.
Yokneam Industrial Park, 2 Hamada St.,
POB 142, Yokneam 20692, Israel
Tel: +972-4-959 6777 Fax: +972-4-959 0729
E-mail: [email protected]
Installing the PRX-20 Card Reader
1. Select a location to install the PRX-20 card reader. The recom-
mended height for installation is 1.4m.
2. Prepare an outlet hole (of 15mm) in the installation pane.
3. Drill two 6mm fixing holes to wall and place fixing rubber plugs
into the holes.
Picture of PRX-20 installation
4. Connect wires between PRX-20 and the controller.
5. Turn on the power to test. When the power turns on screw the
unit into place.
Use a #24 parallel. Do not install in a wire casing with
strong current power cords.
Do not expose to direct sunlight, high temperatures, or
strong electromagnetic interferences.
If installed outdoors, a lightning protective device may be
necessary.
Packing List of PRX-20
The following items should be found in the PRX-20 package:
•Color external packing carton with bar code mark, grey/black
internal packing box
•PRX-20: 1 (with model bar code and date of production)
•Fixing rubber plug and tapping screws: 1 set
•Instruction Manual: 1
•Warranty Card and Quality Certificate: 1
•
1K pullup resistors: 2 (optional)
PRX-20 (D)
Card Reader
User Manual
Cat. no.: 650619
Document no. : PRX20-222-02
