2.
Two or three batteries were installed with the incorrect polarity.
Observation: The meter will not power on. Reinstall the batteries correctly.
3.
All four batteries were installed with the incorrect polarity.
Observation: The 0.63Amp circuit breaker will disengage power. The meter will not
power on. Remove all four batteries. Reset the circuit breaker. Reinstall the
batteries correctly.
4.2
Resetting the circuit breaker
Figure 4
Figure 4 shows the circuit breaker located at the bottom of the meter just below the
battery housing.
Remove the battery cover. With a small screwdriver, push the small white tab of the
circuit breaker to the right. A small click will sound when the reset tab has been moved
all the way to the right. The circuit breaker is now reset.
The most probable reason for setting off the circuit breaker would be incorrectly installed
batteries.
4.3
Powering up the meter
Options: Batt.=100%
→
1. Real time reading
2. Averaged reading
3. PowerOFF / Setup
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
