When cut to the correct length and height, secure the extensions in the EVO Extension Clamps with the two grub screws provided (pre-
inserted into the clamps). We recommend the application of a light textured assembly paste (carbon paste) between the extension and
the inside of the clamp to ensure a secure fit. Successive loosening and tightening of these screws over time, will require the reapplication
of a light strength retaining compound (LOCTITE 222).
WARNING:
Ensure you do not crush tubes by over torqueing the clamp screws. The tight tolerances on EVO Extension Clamps require a round tube for
insertion and removal. Crushing of the tube may lead to the inability to remove a tube from the extension clamp body.
WARNING:
We do not recommend the use of carbon extensions in EVO Extension Clamps. The grub screw clamping method is likely to damage a carbon
tube and in such instances, may lead to tube failure.
