Synapse SNAP Stick 200, User Manual, Page: 7 / 7

3. Regulatory Information and Certifications
RF exposure statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance of 20cm between the radiator and your
body. This transmitter must not be co
- located or operating in conjunction with any other antenna or
transmitter.
FCC certifications and regulatory information (USA only)
FCC Part 15 Class B
These devices comply with part 15 of the FCC rules. Operation is subject to the following two conditions: (1)
These devices may not cause harmful interference, and (2) These devices must accept any interference
received, including interference that may cause harmful operation.
Radio Frequency Interference (RFI) (FCC 15.105)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. T
his equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occu
r in a particular
installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of th e following measures:
• Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Labeling Requirements (FCC 15.19)
This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
If the FCC ID for the module inside this product enclosure is not visible when installed inside another device,
then the outside of the device into which this product is installed must also display a label referring to the
enclosed module FCC ID.
Modifications (FCC 15.21)
Changes or modifications to this equipment not expressly approved by Synapse Wireless, Inc. may void the
user’s authority to operate this equipment.
Declaration of Conformity
(In accordance with FCC 96 -208 and 95-19)
SNAP Stick 200 3