background image

Disclaimers 

Information contained in this Manual is provided in connection with Synapse products and services and is intended solely to assist its customers. Synapse 
reserves the right to make changes at any time and without notice. Synapse assumes no liability whatsoever for the contents of this Manual or the 
redistribution as permitted by the foregoing Limited License. The terms and conditions governing the sale or use of Synapse products is expressly 
contained in the Synapse’s Terms and Condition for the sale of those respective products. 

Synapse retains the right to make changes to any product specification at any time without notice or liability to prior users, contributors, or recipients of 
redistributed versions of this Manual. Errata should be checked on any product referenced. 

Synapse and the Synapse logo are registered trademarks of Synapse. All other trademarks are the property of their owners. For further information on any 
Synapse product or service, contact us at: 

Synapse Wireless, Inc. 

6723 Odyssey Drive 

Huntsville, Alabama 35806 

256-852-7888 

877-982-7888 

256-924-7398 (fax) 

 

www.synapse-wireless.com 

 

License governing any code samples presented in this Manual 

Redistribution of code and use in source and binary forms, with or without modification, are permitted provided that it retains the copyright notice, 
operates only on SNAP® networks, and the paragraphs below in the documentation and/or other materials are provided with the distribution: 

Copyright 2008-2015, Synapse Wireless Inc., All rights Reserved. 

Neither the name of Synapse nor the names of contributors may be used to endorse or promote products derived from this software without specific prior 
written permission. 

This software is provided "AS IS," without a warranty of any kind. ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, 
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED. 
SYNAPSE AND ITS LICENSORS SHALL NOT BE LIABLE FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING OR DISTRIBUTING 
THIS SOFTWARE OR ITS DERIVATIVES. IN NO EVENT WILL SYNAPSE OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA, OR FOR 
DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY, 
ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE, EVEN IF SYNAPSE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 

Preliminary 

- Pre-Release 

Version

Summary of Contents for SNAP Connect E20

















Reviews: