SYN-INT-E01
16
View of the Preprogramming
The view of the selected preprogramming is made in a way sim-
ilar to the Auto mode programming. However, it is impossible to
modify the preprogramming.
You must proceed as follows:
1. Press down the button corresponding to the day to view
(buttons Mon to Sun). When the selected day is displayed,
the SET icon and period number blink.
2. Choose the period number (1 to 2) to view using the + or -
button. For each period, the hour and set point are displayed.
You can also press down the Mode button to switch to period
2. If you press down the Mode button when period 2 is
displayed, you exit the View mode.
At any time, you can exit the View mode using one of these
3 methods.
1- Press down the button of the day you are viewing.
2- Press down another day to view it.
3- Press down the Exit button.
If you do not press down any button during 1 minute, the ther-
mostat quits the view mode. At any time, it is possible to change
the day to be viewed by pressing down the desired day button.
Ambient/Floor Mode
To switch from the Ambient mode to the Floor mode, or con-
versely, press down the A/F button (when you are not in any ad-
justment mode). Then, the temperature set point will become
the same as the Floor or Ambient mode temperature, as appli-
cable. However, if a set point is programmed for the current pe-
riod, it will take this value.
